Hutchins developed a acoustically balanced viola which she would later call the alto violin. Due to the traditional over the shoulder playing method of the viola there are major acoustic flaws with the instruments as the string length is shorter then ideal and the internal volume of the instrument is also smaller then ideal. Hutchins corrected both of these issues by developing a viola that is played upright and held between the legs much like the cello. Hutchins also tested many designs for an over the shoulder model of the instrument that were capable of greater acoustic balance, but none of the instrument shapes were ergonomic enough to act as good concert level instruments. The vertical viola developed by Hutchins is over 50centemeters long, making for a much taller instruments then is standard. ¹⁾

Early in her acoustic experiments Dr. Hutchins was inspired to build a set of instruments with various ranges that all had the acoustic balance found in the violin. She was led to this idea by recommendation by Henry Brant in 1957 when he mentioned that violins don't have a clear instrument family like those found in woodwinds. Hutchins saw the many flaws and uneven pitch distribution of the string family and sought to correct these issues by first making the distribution of instruments more even, adding a member between the cello and viola, redesigning the viola so that is is far more acoustically balanced, adding two members above the tuning of the violin and finally making two new members below the cello that take on the range of the contrabass. Taking influence from wind instrument families all of the instruments are evenly distributed two to an octave and all of them are tuned in half octave increments that repeat throughout the range. Her work on creating the violin octet represents the first time that there was a truly balanced consort of string instruments since the viol da gamba family.

The instruments in the Violin Octet are-
Treble Violin tuned to G4–D5–A5–E6, one octave above the violin, a new member tuned like the kit or pochette about the size of a 1/4 violin.
Soprano Violin, tuned to C4–G4–D5–A5, one octave above the viola, another new member somewhat like the violino piccolo and the size of a 3/4 violin.
Mezzo Violin, tuned to G3–D4–A4–E5, same as the violin. The instrument has a longer body by 12-22mm with the same string length as a violin.
Alto Violin, tuned to C3–G3–D4–A4, same tuning as a viola but played upright like a cello due to the larger body size.
Tenor Violin, tuned to G2–D3–A3–E4, one octave under the standard violin, acted as a similar instrument to the tenor violin or viola da spalla.
Baritone Violin, tuned to C2–G2–D3–A3, Tuned the same as a cello but with a larger body.
Bass Violin, tuned to G1–D2–A2–E3 or A1–D2–G2–C3, acts as a new member between the standard tuning of a double bass and cello with a body about the size of a bass.
Contrabass Violin, tuned to C1–G1–D2–A2 or E1–A1–D2–G2 (same as double bass tuning) like the double bass but with a far larger body to balance the instrument acoustically.

Her first octet was first presented in 1965. Several further octets were built by Dr. Hutchins and there are currently six full octets and one partial octet in use today throughout the world. ²⁾

Dr. Hutchins developed new methods for tuning the top and bottom boards of string instruments. This technique called plate tuning paid special attention to the resonate frequency to the top and bottom plate of string instruments in order to find the acoustically optimal behavior of the plates for communicating and amplifying sound into the body. The findings that Dr. Hutchins made were instrumental in creating acoustically balanced string instruments outside of the violin, and directly led to her re imagining of the viola and later her development of the violin octet.

Hatchins published over 100 papers on acoustics and has authored over 5 books.

The Catgut Acoustical Society formed out of collaboration Dr. Hutchins and several other people who were working with the complex issues of instrument acoustics. Out of these collaborations the group decided to form a society to present their findings. The core principles were to unravel what makes a good string instrument good, with a specific focus on the violin. They wanted to demystify the various secretive practices of violin makers and find scientific principles about string instruments that would produce reliable and repeatable ways to construct well functioning musical instruments. The Catgut Society also had a huge focus on making research into acoustics and instrument making free and available to the public which was uncommon at the time as many of the most skilled aspects of violin making were deeply held trade secrets.

Plans are avliable for the violin octet on Joe McNalley's website ³⁾ Hutchins consort website- ⁴⁾
Biography on the Catgut Acoustical Society website- ⁵⁾
Other earlier attempts to create a more balanced string section include the work of Alfred Stelzner, and Fred L. Dautrich who both built missing members of the string ensemble.
All authentic Hutchins instruments are labelled with a SUS numbers inside of the sound body of the instrument. The SUS number means pig in Latin.
Joe McNalley is the director of the Hutchins Consort and also a scholar of Dr. Hutchins work.